Efficient screw pump design with positive displacement that is designed for in-tank installation. The brushless controller logic uses a simple power and ground. The pump output is set to 100% duty cycle for maximum performance.
All sealed weather resistant electronics with 3ft wiring leads. Includes a 31 micron inlet filter.
Features:
Controller wires power in Red wire +12V power in supply
Black wire – Ground
Orange wire - PWM control (cannot control with Hobbs switch, unlike older versions the BKS1001-4) leave disconnected for 100% duty cycle.
simple PWM controllers from Amazon work well for non aftermarket ecu’s.
Controller wires power out to pump Pump wire harness
Blue wire – Phase 1 to pump Red
Green wire – Phase 2 to pump Green
White wire – Phase 3 to pump White
Black wire – Ground Black
Efficient screw pump design with positive displacement that is designed for in-tank installation. The brushless controller logic uses a simple power and ground. The pump output is set to 100% duty cycle for maximum performance.
All sealed weather resistant electronics with 3ft wiring leads. Includes a 31 micron inlet filter.
Features:
Controller wires power in Red wire +12V power in supply
Black wire – Ground
Orange wire - PWM control (cannot control with Hobbs switch, unlike older versions the BKS1001-4) leave disconnected for 100% duty cycle.
simple PWM controllers from Amazon work well for non aftermarket ecu’s.
Controller wires power out to pump Pump wire harness
Blue wire – Phase 1 to pump Red
Green wire – Phase 2 to pump Green
White wire – Phase 3 to pump White
Black wire – Ground Black
1440cc at 43.5 psi and 1650cc at 58 psi . These flow 142LB/HR in an LS rail running 43.5 PSI and 163LB/HR at 58 PSI. In the short 38mm version, they have an extended tip. These...
R&D Performance Fabrication setting industry standards.
