11x22x2.5” Dual Pass Heat Exchanger
$550.00Includes:
- 3/4” barbs, 12an or 16an bungs
- 1/4-20 mounting bosses ...
1300 cc min -3.0 BAR (43.5psi) Flow Matched Injectors (1450cc @ 58psi) EV1 XT Tip
$150.00Our High Impedance Bosch 1300cc @ 43.5 psi / 1450cc @ 58psi are digitally flow matched with full flow data and calibration data. They come in sets that are matched to less...
1440 cc min -3.0 BAR (43.5psi) Flow Matched XT TIP Injectors (1650cc @ 58psi) USCAR ev6
$189.001440cc at 43.5 psi and 1650cc at 58 psi . These flow 142LB/HR in an LS rail running 43.5 PSI and 163LB/HR at 58 PSI. In the short 38mm version, they have an extended tip. These...
16x22x2.5” Dual Pass Heat Exchanger
$675.00Includes:
- 3/4” barbs, 12an or 16an bungs
- 1/4-20 mounting bosses ...
2600 cc min -3.0 BAR (43.5psi) Flow Matched Injectors (3000cc @ 58psi) - Compatible with Methanol
$279.00- Works with most fuel except for fuels that contain MTBE. These are compatible w...
2600 cc min -3.0 BAR (43.5psi) Flow Matched Injectors (3000cc @ 58psi) - Not compatible with methanol
$179.00- Works with most fuel except for fuels that contain MTBE. Not compatible with me...
AC Low Mount
$755.95Low ac add on kit for lsa application. Comes with ac compressor sd7b10 (smallest size available) ac compressor mount ac tensioner ac belt 4 rib hardware and adapter bracket to ls blocks
Black Plastic Reservoir
$99.00Custom Fabricated Reservoir 1-5 gallon aluminum custom fabricated $450 Options Std coolant fill port and cap included Add billet small lid $$60 Add billet large lid $200 An fitting or push on barb connection (Must...
Bosch 34/38mm LSA LS3 LS9 LSX LS7 Injectors (Set of 8)
$520.00- LS3, LS7 LSA, LS9 application
- Please must select the option b...
Bosch Intercooler Pump
$120.00Options: Bosch intercooler pump sealed relay harness $89 Bosch pump p-clamp mount $9
Bosch style intercooler pump relay harness
$94.00HD Bosch style EV1 connection intercooler pump harness. Perfect for LSA and supercharger swaps.
Brushless 550Lph fuel pump kit 1000 crank / 800 whp
$699.00Efficient screw pump design with positive displacement that is designed for in-tank installation. The brushless controller logic uses a simple power and ground. The pump output is set to 100% duty cycle for maximum performance....
Coolant Hose Kit 12an Black Braided Hose and Black Fittings
$550.00Includes:
- 15’ 12an 235 series RH hose, (4) 90° black 12an fittin...
Coolant Hose Kit with 12an Push Lock Fittings
$250.00Includes:
- 15’ 3/4” hose, (4) 90° black 12an push lock fittings, ...
Eaton Solid Isolator Serialized LSA / LS9
$69.99Correct solid isolator we use in all our lsa ls9 builds.
EFI MAT Temp Sensor aka (Intake Air Temp)
$35.00Intake air temp sensor needed for ls swaps utilizing a Holley HP, Dominator, Terminator X or X Max system.
Ewp150 Intercooler pump fittings
$0.00Davis Craig Ewp150 intercooler pump fittings Selection comes as a SINGLE FITTING. Pumps require 2 fittings 3/4”, 12an, or 16an sizes
Extreme Automatic 4L80e 1-2 gear leave manual valve body with TransBrake
$895.0034G80 Billet Aluminum Reverse Manual with Brake TRANSBRAKE HOT IN 1ST AND 2ND MUST USE TRANSBRAKE FOR REVERSE NO ENGINE BRAKINGFEATURES:Designed from clean sheet of paperPro Tree Solenoid and DesignWorks Well on the Street...
Extreme Automatic 4L80e 1st gear only leave manual valve body with TransBrake
$895.004L80 Billet Aluminum Reverse Manual with PRO BRAKE 1st gear only! Available with or without Engine Braking Features:Designed from clean sheet of paperPro Tree Solenoid and DesignWorks Well on the Street and at the...
Gen 4 lsa ls3 ls9 Tps Extension
$54.95Correct 6 pin TPS drive by wire extension kit needed with lsa swaps.
Haltech EFI 1 hour tuning session
$375.001 hour touch up session, this is for touch up jobs which require 1 hour of less support remotely
Haltech EFI 2 hour tuning session setup & remote logging
$599.002 hour setup session, this is to setup, remote log and build the base calibration remotely. Some calibrations may require more than 2 hours. In these cases we will bill them hourly in addition
Haltech Rebel LS Engine Management Systems Ls1 kit HT-220201
$1,495.00HalTech Nexus Rebel LS Engine Management Systems Setting a new standard in LS engine control, Haltech Nexus Rebel LS engine management systems have done all the hard work to provide you with a cost-effective, quick,...
Haltech Rebel LS Engine Management Systems Ls3 kit HT-220204
$1,495.00HalTech Nexus Rebel LS Engine Management Systems Setting a new standard in LS engine control, Haltech Nexus Rebel LS engine management systems have done all the hard work to provide you with a cost-effective, quick,...
Harrop 2650i 65mm Zpe griptech 2.55” 8 rib pulley
$229.00Harrop 2650i 2.55” upper pulley 12 rib designLevel 3 griptech coating (Picture of 3" version)
Harrop 2650i Supercharger
$5,400.00- Harrop designed lower manifold incorporates TVS2650 rotating group proven...
Harrop 2650i Zpe griptech 2.55” 12 rib pulley
$229.00Harrop 2650i 2.55” upper pulley 12 rib designLevel 3 griptech coating (Picture of 3" version)
Harrop 2650i Zpe griptech 2.55” 8 rib pulley
$210.00Harrop 2650i 2.55” upper pulley 8 rib designLevel 3 griptech coating
Harrop 2650i Zpe griptech 3” 12 rib pulley
$229.00Harrop 2650i 3” upper pulley 12 rib designLevel 3 griptech coating
Heavy duty intercooler pump universal harness 20’
$110.0020’ universal hot wire intercooler pump harness. Comes with sealed 30amp relay and ground cable.
High Mount Accessory Drive lsa Kit
$2,450.00Includes: Alternator Powersteering pump Alt/PS bracket Idler 6 rib 6 tensioner 8 rib idler and idler block oem 8 rib tensioner and tensioner block Hardware 6 rib belt Stock 8rib belt Lsa waterpump
Holley EFI 2 hour tuning session setup & remote logging
$599.00This is a full setup, remote logging and calibration session. Any additional hours will be billed hourly
Injector Lower o-ring Stops set of 8
$30.00- Designed to prevent injectors from floating up and down due to poor machi...
LS1 to LS3 Map Adapter
$35.00Works to converter the ls1 early style map sensor to ls3 lsa ls9 style later gen 4 sensor. Commonly used on gen 4 1 bar, 2.5 bar, 3 bar, and 4 bar map sensors
Lsa 8 rib kit add on
$750.00Lsa 8 rib kit add on perfect for G8, Chevy SS, hot rods and other Lsa swaps looking to go 2-3 belt setup. No slip issues with oem systems like this compared to 6 rib...
LSA Camaro Zl1 supercharger lid
$750.00- Includes 2.5 bar map sensor, intake air temp sensor, intercooler brick, bolts and green...
Lsa Low Mount Accessory Drive
$2,450.00Includes: Alternator 253amp alternator bracket 6 rib idler Power-steering pump type 2 Power-steering pump bracket Power-steering pulley 6 rib tensioner 8 rib idlers 8 rib idler bracket 8 rib tensioner 8 rib tensioner mount hardware 6...
Lsa Ls9 2.5 bar map sensor
$48.00Lsa Ls9 2.5 bar map sensor works with Zl1, CTSV, Kong, Harrop, Synergy, DSX, and DMS lids great for turbo applications too
Lsa Ls9 Intake Air Temp Sensor M14x1.5
$39.95Lsa Ls9 Intake Air Temp Sensor M14x1.5 threads works with: Zl1, CTSV, Ls9, DSX, DMS, Kong, Synergy, Harrop lids *note - This is not a standard NPT intake air temp sensor. These are metric...
LSA Supercharger New
$2,599.00- Eaton serialized isolator installed, oil filled and properly reseale...
New CTSV intercooler brick reinforced
$659.00Brand new GM CTSV intercooler bricks. These come reinforced in house and pressure tested. Picture does not display but we do weld the center now per customer requests. Also bricks do not come reinforced on the...
New ZL1 reinforced intercooler brick
$750.00Brand new GM ZL1 intercooler brick. These come reinforced in house and pressure tested. Picture does not display but we do weld the center now per customer requests. Also bricks do not come reinforced on the front....
Pro Lithium Charger
$39.95Pro Lithium charger only! Required for ALL Pro Lithium batteries. 12v 4amp
Pro Lithium Race Battery without charger
$0.00Pro Lithium Race Batteries Don’t let their size fool you, these lithium batteries pack a decent punch in performance! - Integrated with smart cell technology and ability to check on status with built in...
Reinforced intercooler brick modification
$150.00Customers must ship their good used or new intercooler brick for modification. This listing i...
Zl1/ CTSV intercooler Brick reinforcement
$150.00Customers must ship their good used or new intercooler brick for modification. This li...
- Home Home
- Electronic Fuel Injection Systems Electronic Fuel Injection Systems
- Fuel Injectors & Fuel Pumps Fuel Injectors & Fuel Pumps
- Superchargers & Supercharger Kits Superchargers & Supercharger Kits
- Supercharger Accessories Drives & Parts Supercharger Accessories Drives & Parts
- Heat Exchangers / Cooling Heat Exchangers / Cooling
- Intercooler Pumps & Cooling Accessories Intercooler Pumps & Cooling Accessories
- Transmission & Torque Converters Transmission & Torque Converters